Updated on 17 November 2026
Measuring noise with your phone: decibels, accuracy and limits
A smartphone microphone is enough to estimate the sound level around you. Here is how to measure properly, how to read the result and what a phone cannot do.
What a decibel measures
The decibel (dB) is a logarithmic scale: +3 dB means double the sound energy, and +10 dB is perceived as roughly twice as loud. Going from 50 to 60 dB is clearly louder, not “a bit” louder.
Noise is most often measured in dB(A), a weighting that mimics the sensitivity of the human ear.
Sound level references
| Situation | Approximate level |
|---|---|
| Whisper, quiet bedroom at night | 30 dB |
| Quiet office, library | 40 dB |
| Normal conversation | 60 dB |
| Busy street, vacuum cleaner | 70 to 80 dB |
| Heavy traffic, lawn mower | 85 to 90 dB |
| Concert, nightclub | 100 dB and more |
A few household appliances
For reference, here are typical levels at one metre from the appliance. They vary with the model and its age.
| Appliance | Typical level |
|---|---|
| Refrigerator | 35 to 40 dB |
| Fan on low | 40 to 55 dB |
| Dishwasher | 45 to 55 dB |
| Range hood | 55 to 70 dB |
| Vacuum cleaner | 70 to 80 dB |
| Hair dryer | 80 to 90 dB |
Measuring properly, step by step
- Remove the case and keep the microphone uncovered (often at the bottom of the phone).
- Hold the phone still, at arm's length, without touching or rubbing it: handling noise skews the measurement.
- Let the measurement run for at least 30 seconds: an instant value varies a lot.
- Read the average level (Leq), the minimum and the maximum rather than a single number.
- Shield the microphone from wind, which creates a false low rumble.
Reading minimum, average and maximum: an example
Imagine a one-minute measurement in a living room: minimum 38 dB, average (Leq) 52 dB, maximum 71 dB. The minimum is the silence between two noises, the maximum a peak (a slamming door, a raised voice), and the Leq sums everything up as a single level.
If the Leq is close to the minimum, the noise is steady. If it is close to the maximum, peaks dominate. To compare two rooms or two moments of the day, the Leq is the most telling value.
The limits of a phone microphone
- It saturates around 90 to 100 dB: beyond that, the displayed value is no longer reliable.
- Phones differ: the gap between two models can reach several decibels.
- Automatic gain or noise processing can skew the measurement on some phones.
- An app does not replace a certified sound level meter for a regulatory or professional measurement.
Documenting a nuisance noise (neighbours, appliance, building work)
- Measure in the same place, at the same height, several times, at different hours.
- Note the date, the time, the duration and the source of the noise.
- Record the Leq and the maximum, not just an isolated number.
- Save the measurement with a title and a note, then export it to keep it.
- Also measure the background calm (without the source) to show the difference.
Improving accuracy: calibration
Place your phone next to a reference sound level meter, facing a steady sound, and note the gap: you then simply apply it as an offset to all measurements. This brings values noticeably closer to reality.
For hearing health, common guidelines take about 85 dB(A) as the level above which long exposure carries a risk: above it, protect yourself and shorten the exposure.
Which levels to aim for at home
Commonly cited reference points are about 30 dB at night in a bedroom and 35 to 40 dB during the day in a quiet living space. A steady noise above these levels is noticeable even if it is not harmful. They are comfort references, not legal limits.
Frequently asked questions
Can a phone measure decibels accurately?
It gives a useful estimate, often within a few decibels, especially after calibration. It saturates at very high levels and does not replace a certified sound level meter.
Does a phone measurement have legal value?
No. It can document a nuisance, but an official measurement requires a compliant meter and a precise protocol.
What is the difference between dB and dB(A)?
dB(A) weights frequencies according to the sensitivity of the human ear: it is the unit most used to describe perceived noise.
What is Leq?
It is the average sound level, calculated on energy, over the length of the measurement: the steady level that would have produced the same sound energy.
Why does my phone show strange or very low values?
The microphone may be blocked (case, finger), or the phone may apply automatic sound processing. Uncover the microphone, change position and compare with a reference sound level meter to calibrate.
How do I measure noise during the night?
Put the phone on a stable support, microphone uncovered, and start a long measurement: the average level (Leq) over the night tells you more than an isolated peak.
Can I measure a concert with a phone?
Roughly: the microphone often saturates above 90 to 100 dB, so the values shown will be lower than reality. Protect your ears in every case.
What is the difference between background noise and ambient noise?
Background noise is the level without the source you care about; ambient noise is the total level, source included. Comparing the two shows the real effect of the source.
